見つめるとうっとりしちゃう芸術的な催眠模様のケーキレシピ B...
見つめるとうっとりしちゃう芸術的な催眠模様のケーキレシピ BEST12

Materials Toning palette Silicon strawberry mold UV LED resin SOFT Coloring agent Toning stick UV light utility knife sponge Square silicon mold Scissors Color art resin Piping tip for color art resin Ring table round plate glue Steps 1 Place UV resin soft and coloring agent on the toning palette and make red and white resin solution2 Thinly paint red resin on the strawberry mold and harden with UV light3 Put red and white resin in and draw strawberry cross section with toning stick4 Cure and cut in half lengthwise5 Cut the sponge 5 mm thick and cut according to the square mold Then cut it further into three equal parts6 Place white resin in the mold and put sponge from 5 on the top and bottom and strawberries from 4 in the center7 Put white resin in the center gap and cure8 Paint color art resin on the upper side and the right side and cure9 Attach the color art resin piping tip make a whipped cream shape and cure10 Complete by sticking 9 on the ring base 美味しそうなショートケーキを食器洗い用のスポンジとレジンで作ってみました 本物のスポンジを使用しているのでふわふわ感は折り紙付きですよ 用意するもの 調色パレット いちごのシリコンモールド UV LED レジン 星の雫 SOFT 着色剤 いろどろっぷ 調色スティック UVライト カッター スポンジ 正方形のシリコンモールド ハサミ カラーアートレジン カラーアートレジン専用 しぼり口 リング台 丸皿 ボンド 作り方 1 調色パレットにUVレジン ソフトと着色剤を入れて赤と白のレジン液を作る2 いちごのモールドに赤のレジンを薄く塗ってUVライトで硬化する3 赤と白のレジンを入れて調色スティックでいちごの断面を描く4 硬化し縦半分にカットする5 スポンジを5mmの厚さにカットして 正方形のモールドに合わせてカットし さらに3等分にカットする6 モールドに白のレジン入れて上下に5のスポンジを入れ中央に4のいちごを入れる7 中央の隙間に白のレジンを入れて硬化する8 カラーアートレジンを上辺と右辺に塗り硬化する9 カラーアートレジンにしぼり口を装着してホイップクリームの形を作り硬化する10 ボンドで9をリング台につけたら完成
見つめるとうっとりしちゃう芸術的な催眠模様のケーキレシピ BEST12
✦ CONNECT WITH ME ✦ ETSY ↠ https://www.etsy.com/au/shop/SeriouslyCreativeAU?ref=seller-platform-mcnav INSTAGRAM ↠ https://www.ins...
POLA リンクルショット メディカル セラム [医薬部外品](美容液) 20g ¥16,200(税込) http://www.pola.co.jp/brand/wrinkle/products/
高温のヘアアイロンを使わずにゴージャスな巻き髪をつくるやり方を紹介。
🇮🇹カラーの三色ラビオリ レシピはこちら:https://taste.md/2slb0Lw
Designer Natalie Chong shares how she created a handsome, cozy bedroom for her brother-in-law on a $2,000 budget. Watch the small ...
▋简介
※ボタンホールに穴を開ける際、リッパーを使うと切りすぎてしまう可能性があります(リッパーは良く切れる為) 穴を開ける際は裁ちばさみか反対の端にまち針打ってください(コメント欄よりアドバイスいただきました!ありがとうござます!)
手提げバッグ 作り方 裏地付き ショルダーベルト紐作り方 How to sew a handbag how to make a shoulder bag out of fabric ワイヤー口金バッグ作り方
H&H’s Lynda Reeves and Beth Hitchcock debate their favourite ways to invest money in a home for maximum impact. Whether it’s upgra...
Copyright © 2017 - All Rights Reserved - www.ichaowu.com